LCI308和LCI408系列 数显表尺寸为1/8 DIN，用途广泛。它几乎能够接受所有的过程输入信号。LCI308带有4-3/4数字显示，可将量程对应成-32000到+32000范围内的数字。它可以接受0-10V，4-20mA，热电偶J，K，T和热电阻信号，时间定时信号，计数信号和应力信号。LCI408有多种输入方式，不仅仅包括LCI308的所有输入信号，还可接受电位计输入。五位数字显示能够将量程对应成-99999到+99999的数字。采用双显示，可同时显示当前测量值和其它值，比如峰值或谷值。可选带有继电器输出和晶体管设定点输出，BCD码并口输出， RS-232/RS-485电脑通讯接口输出，和4-20mA再变送输出
DPMA系列 多功能LCD数显表尺寸为标准的1/8 DIN，3位半的数显。它接受4-20 mA， 0-5 VDC或0-10 VDC输入信号， 可大范围的调整零点和量程。标准功能包括：可选工程单位，可现场选择小数点位置，可选琥珀色，红色或绿色LCD显示。如果需要背光显示，需要接24 VDC的电源。
LPI型 二线制回路指示仪接受4-20 mA输入信号，能显示过程变量：压力，液位，流量，温度或相对湿度。红色明亮的LED数显能够现场显示或远传显示。可采用盘面的三个按键编程配置。可配置输入输出量程范围，工程单位，偏移量，小数点位置，安全密码等。 LPI还能显示线性，开方等19种特定的曲线。聚碳酸酯的外壳为NEMA 4X（IP65）的防护，侧面带有1/2" NPT内螺纹管接口。
3-1/2 digit, 0.6" high LED display is combined with an integral 24 VDC power supply to provide a complete digital indicating system when used with Dwyer 2-wire transmitters. Standard unit is supplied to read 0-100.0% and is field adjustable from 1.999 to 1999 for readout of actual engineering units. Panel mounting hardware included. 1/8 DIN size: 1.64" H x 3.59" W x 4.13" D.
DPMX系列 超大屏幕数显表能在较远的距离，或较暗的地方显示清晰，读数容易。2.3英寸高的LED可以选择红色，绿色或蓝色显示。它用于盘装，接受通用供电，用户可选不同的常用过程输入信号。DPMX还带有可180度调整的安装板。
The Series BICV Brass Inline Check Valves are ideal for use with a broad array of service mediums including compatible oils, gases, fuels and hydrocarbons. They incorporate a soft seat for a bubbletight shutoff and are spring-loaded for rapid reseating at high and low temperatures. The Series BICV was designed with a smooth flow profile to minimize head loss and accumulation of debris. The low 0.5 psi (0.04 bar) cracking pressure and patented guided-disc technology ensure reliability at low and high service pressure.
Series BFC Brass Flap Check Valve is an economical check valve for both commercial and industrial application. Quality brass body and stem construction allow for long service life and reliability. Ideal where backflow could potentially cause damage to equipment by yielding reverse flow. Pressure in the line moves the flap off of the seat, opening the valve. When the inlet flow comes to a halt, back pressure moves the flap back onto the seat, stopping the flow. Designed to provide excellent flow characteristics with minimal turbulence and pressure loss while maintaining its ability to prevent backflow.California Residents: Click Here for Proposition 65 WARNING.